Bosch GSR 36 VE-2-LI Professional Manual Original página 12

OBJ_BUCH-1916-002.book Page 11 Monday, October 20, 2014 12:17 PM
Symbol Meaning
Switching On
Switching Off
Right/left rotation
Prohibited action
Battery Capacity
U Rated voltage
n Impact rate
S
n 1 No-load speed (1. gear)
0
n 2 No-load speed (2. gear)
0
M Maximum torque according to ISO 5393
Brickwork
Metal
Wood
Ø Drilling diameter, max.
Ø Max. screw dia.
Chuck clamping range
Weight according to
EPTA-Procedure 01/2003
* depending on the battery pack being
used
L Sound pressure level
pA
L Sound power level
wA
K Uncertainty
a Vibration total value
h
T permitted ambient temperature during
1
charging
T permitted ambient temperature during
2
*
operation and storage
* Limited performance at temperatures <0 °C
Recommended batteries
Recommended chargers
Delivery Scope
Cordless screwdriver with auxiliary handle/Combination
cordless drill with auxiliary handle.
Battery, application tools and other accessories shown or
described are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Bosch Power Tools
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramics and plastic.
GSB machines are additionally intended for impact drilling in
bricks, brickwork and masonry.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Technical Data
The technical data of the machine are listed in the table on
page 165.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2009/125/EC (Regulation
1194/2012), 2011/65/EU, 2014/30/EU, 2006/42/EC in-
cluding their amendments and complies with the following
standards: EN 60745-1, EN 60745-2-1, EN 60745-2-2.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
01.09.2014
Noise/Vibration Information
The measured values of the machine are listed in the table on
page 165.
Sound emission values determined according to
EN 60745-2-1.
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main appli-
cations of the tool. However if the tool is used for different ap-
plications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signif-
icantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the acces-
sories, keep the hands warm, organisation of work patterns.
English | 11
1 609 92A 0WX | (20.10.14)