AERMEC Omnia HL S Serie Manual De Instrucciones E Instalación página 21

MAIN COMPONENTS
1 Head with adjustable fins
2 Control board
3 Cabinet
4 Feet (accessory ZH)
5 Load-bearing structure
OMNIA HL_S
DESCRIPTION OF COMPONENTS
HEAT EXCHANGE COIL
2-row coil with copper pipe and alu-
minium fans, held in place by means
of the mechanical expansion of the
pipes. The collectors are fitted with
female connections and air vents in
the upper part of the coil. The coil can
be rotated on the worksite.
CABINET
HL_S : Casing in RAL9002
HL_SM : Casing in FIAT656
The casing is made of galvanised steel,
varnished with polyester powders to
guarantee high resistance to rust and
corrosion.
The feet (ZH accessories series) are
either in RAL7044 plastic material
to be combined with the HL_S ver-
sion (RAL9002) or in RAL7031 to be
combined with the HL_SM version
(FIAT656) To select the feet, please
consult the documentation for the ZH
accessories series.
ELECTROSTATICALLY PRECHARGED
AIR FILTER
Fire resistance Class 2 (UL 900).
Easily extractible, it is supplied with the
fan coil in a sealed box which should
be opened only upon use. The electro-
3
4
6
7
8
statically pre-charged filter combines
the normal mechanical filtering of the
air that passes through the filter, with
an electrostatic attraction of powder
that increases its filtering considerably.
ELECTRIC FAN ASSEMBLY
Applied directly to the frame, it consists
of extremely quiet, compact, double
suction centrifugal fans. The electri-
cal motor, protected against overload-
ing, has three speeds with the running
capacitor always on, directly couplet
with the fans and cushioned with flex-
ible supports. The fan shrouds can be
inspected (an operation that can only
be carried out by personnel with the
specific technical skills), which also
means the inner parts can be accu-
rately cleaned.
LOAD-BEARING STRUCTURE
Made of sheet metal of an adeguate
thickness, and galvanised to protect
against oxidation. Equipped with
closed cell thermal insulation with
Class 1 fire resistance.
Holes in the back for wall mounting.
Each device is equipped with a con-
densate collection tray that can be
removed for cleaning (this operation
6 Air filter
7 Fan motor
8 Fan
9 Basin
10 Heat exchange coil
1
9
10
can only be carried out by personnel
with the specific technical skills).
CONDENSATE DISCHARGE
Every device is fitted with a tray for col-
lecting condensation, with a connec-
tion for draining condensation pro-
duced by the unit in cooling mode.
WATER CONNECTIONS
The connections, located on the left
hand side, are female. The possibilità
exists for rotating the battery on the
construction site.
HEAD WITH ADJUSTABLE FINS
HL_S : Colour RAL7044
HL_SM : Colour RAL7031
With the deflector fin fully closed, the
tripping of the microswitch stops ven-
tilation thereby interrupting any further
heat exchange with the environment.
The control panel is also housed in the
head, and is protected by a flap.
IHLSLJ 1004 - 6887203_03
2
5
21