Descargar Imprimir esta página

GreenWorks 48T15 Manual Del Operador página 9

Cortabordes

Publicidad

Idiomas disponibles

Idiomas disponibles

17
9.5
OPERATION TIPS
WARNING
Keep clearance between the body and the machine.
WARNING
Do not operate the machine without guard in place.
Do these tips when you use the machine
Keep a firm hold with the two hands on the machine
while you operate the machine.
Cut tall grass from the top down.
If grass winds around the trimmer head:
Remove the battery pack.
Remove the grass.
9.6
CUTTING TIPS
Tilt the machine toward the area to be cut. Use the tip of
the cutting line to cut grass.
Move the machine from right to left to prevent thrown
debris toward the operator.
Do not cut in the dangerous area.
English
Do not force the trimmer head into uncut grass.
Wire and picket fences cause cutting line wear and
breakage. Stone and brick walls, curbs, and wood can
wear the cutting line quickly.
Dager
area
10
MAINTENANCE
Read and understand the safety regulations and the
maintenance instructions before you clean, repair or do the
maintenance work on the machine.
Make sure that all nuts, bolts and screws are tight. Examine
regularly that you install the handles tightly.
Use only the replacement parts and accessories of the initial
manufacturer.
10.1
GENERAL INFORMATION
Only your dealer or approved service center can do the
maintenance that is not given in this manual.
Before the maintenance operations:
Stop the machine.
Remove the battery pack.
Cool the motor.
Store the machine in cool and dry place.
Use correct clothing, protective gloves and safety glasses.
10.2
CLEAN THE MACHINE
Clean the machine after use with a moist cloth dipped in
neutral detergent.
Do not use aggressive detergents or solvents to clean the
plastic parts or handles.
Keep the trimmer head free of grass, leaves, or excessive
grease.
9
Direction of
Rotation
Best cutting area
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
EN

Publicidad

loading

Este manual también es adecuado para:

Ste302