Reiner jetStamp 792 Manual De Instrucciones página 79

jetStamp 792/792 MP
5. Maintenance
5.1. Replace Cartridge
When using special ink (MP), observe the notes in the operating instructions.
CAUTION
Health risks if ink is swallowed.
Don't swallow!
f
Keep cartridge out of the reach of children!
f
Replace Cartridge

take jetStamp 792 from base station
f
Press [MODE] until [INKJET] appears in the display menu bar.
f
Press [INKJET].
f
The print carriage moves into a central position.
Push the locking rail
f
Take the old cartridge
f
Take the new cartridge
f
16
nozzles or clip.
When using standard ink hold the small felt pad
f
16
nozzles until some ink appears on the felt.
7
Insert cartridge
f
Pull the locking bar
f
Press [INKJET].
f
The print carriage moves to the stamping position.
5.2. Clean Cartridge Contacts
Clean Cartridge Contacts
In rare cases, contamination at the cartridge contacts
Remove cartridge
f
Clean cartridge contacts
f
that may have been slightly moistened with ethanol (spirit).
Fig. C + E
4
.
7
as far back as it will go.
6
out of the print carriage.
6
from its packaging and remove the protective film
10
at handle bar in print carriage.
7
forward again until it locks into place.
Fig. A + C +

6
.
18
at the cartridge
17
that is provided, against the cartridge
E
18
may cause defective print results.
6
and the printing carriage with a soft cloth
18
from
GB
77