Publicidad
Idiomas disponibles
Idiomas disponibles
Using the 3-tooth blade
Caution: Make sure the blade is correctly fitted. Do not use the appliance if the blade is damaged or
deformed: risk of injury!
For jobs such as cutting grass, weeds or medium-sized vegetation on a flat, open surface, you can
replace the 2-wire head with the 3-tooth blade: see the "MOUNTING THE BLADE" section.
Before starting work, inspect the work area and make sure there are no obstacles.
Any contact with stones, metal posts or other barriers must be avoided at all costs to prevent damage
to the blade and the risk of kickback.
When working, always keep the blade level with the ground, using a regular semi-circular movement
from right to left and vice versa.
MAINTENANCE
This appliance must be maintained and repaired in accordance with the manufacturer's instructions.
Always unplug the appliance before carrying out any maintenance or repairs.
-
The appliance must be cleaned and checked regularly. It is not necessary to dismantle the
engine block.
-
Take care to ensure that water or other liquids do not come into contact with the motor during
cleaning.
-
Use a soft, slightly damp cloth to clean the outside of your appliance, and then dry it.
-
Do not use DILUENT, ALCOHOL or OTHER CHEMICALS to clean your appliance.
-
Make sure that the appliance is completely dry before storing it.
IMPORTANT: if a part has to be replaced, it may only be replaced with an original part to avoid any
danger: contact the seller.
Regularly check that the angle drive head is correctly greased. This can be checked by unscrewing
screw (A). If necessary, top up with grease (ask your dealer).
Before each use, check the condition of the thread-cutting device (A). This can be removed by
unscrewing screw (B).
Publicidad
