The fitted cabinet must have a ventilation opening of 250 cm
To achieve this, cut back the base panel or fit a ventilation grille.
Ventilation slots and intakes must not be covered.
The safe operation of this appliance can only be guaranteed if it has been
installed in accordance with these installation instructions.
The fitter is liable for any damage resulting from incorrect installation.
The units into which the appliance is fitted must be heat-resistant up 90ºC.
Installation height not less than 850mm.
Installation dimensions
Ventilation
openings behind
min. 250cm
2
Back
panels
open
Ventilation area in
the base min.
250cm
2
Building in
Do not hold or carry the appliance by the door handle. The door handle cannot
hold the weight of the appliance and may break off.
1. Carefully push the microwave into the box, making sure that it is in the centre.
2. Open the door and fasten the microwave with the screws that were
supplied.
min 45
Ventilation
grid
Note: There should be gap above the oven.
68
* 20 mm for metal fascias
min 6
460
Ventilation area in
Cupboard
feet
10
7
on the front.
2
min.
550
50
Back
panel
open
the base min.
250cm
2
V.1