Toshiba Carrier RBM-A0601UPVA-UL Manual De Instalación página 9

4.
Installation
■
External dimensions and Installation space
Be sure to install the valve kit in the indoor. Failure to do so may cause the frost formation, rust, or malfunction.
0.6" (15)
Connection cable
(Factory wiring)
4-Ø0.24" (6)
Mounting hole
PMV motor
A
Refrigerant pipe connection port
(Liquid pipe / Outdoor unit side)
Note)
This product is designed for the indoor installation.
Model
RBM-A0601UPVA-UL
RBM-A1201UPVA-UL
RBM-A1921UPVA-UL
8.2" (209)
7" (179)
A
Refrigerant pipe connection port
(Liquid pipe / Air Handing unit side)
7.3" (186)
5.4" (138)
3.7" (95)
A (Pipe)
3/8"
1/2"
5/8"
Terminal block (5p)
Connection cable
(Local wiring)
When fi xing the connection cable
with a cable tie, allow a margin
for the connection cable on the
terminal block side.
Cable tie (Accessories No.6)
Pass the connection cable
through the wire clamp and fi x it
with a cable tie.
Wire clamp
• Installation space and maintenance space.
Upper side when installed.
Wall
1.2" (30) or more
1.2" (30) or more
- 8 -
(Unit: in (mm))
3.1" (80)
Wall
Wall
20" (500) or more
Floor
EN