Publicidad
Idiomas disponibles
Idiomas disponibles
Adjustments
You can adjust the picture to your preferences by following
the procedure described below.
You can adjust all the items on the OSD. The item to be
adjusted is indicated white on the OSD.
The adjustment data becomes the unique setting for the
input signal received.
Before adjusting the items, turn on the unit and feed the
video signal from the connected computer/work station.
1 Press the
@@ button.
The
© © OSD (On Screen Display) appears.
eee)
The adjustment data becomes the common setting for all
Th
input signal received.
1 Press the 0 $/# button.
2 For vertical adjustment
The 0:/® OSD (On Screen Display) appears.
Press the '0: $/# buttons.
Se
=a
CY Lo)
2 Press the 0: $/# buttons to adjust picture brightness.
¥ ... to move down
4... for less brightness
# ... to move up
4... for more brightness
For horizontal adjustment
LEN
The 0:/0 OSD disappears 3 seconds after you release the
Press the 0 4=/= buttons.
buttons.
-O+
To reset, press the *** (reset) button while the OSD is on.
&
©... to move left
The adjustment data becomes the common setting for all
= ... to move right
input signal received.
To erase the
© © OSD, press the
& © button again.
1 Press the 0 ¢=/=> button.
The
© @ OSD automatically disappears 10 seconds after
The 0:/0 OSD (On Screen Display) appears.
you release the buttons.
-Or
&
2 Press the O =/=> buttons to adjust picture contrast.
©...
for less contrast
= ...for more contrast
To reset, press the >*+ (reset) button while the OSD is on.
The 'O-/0 OSD disappears 3 seconds after you release the
buttons.
To reset, press the >*+ (reset) button while the OSD is on.
Publicidad
