Descargar Imprimir esta página

Oceanic OCEACUF251NFIX Manual De Instrucciones página 63

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

If the edges of freezer cabinet that the door joint contact are warm;
• Especially in summer (hot weather), the surfaces that the joint contact may get
warmer during the operation of the compressor, this is normal.
If humidity builds up inside the freezer;
• Are all food packed properly? Are the containers dried before placing them in the
freezer?
• Is the freezers door opened frequently? Humidity of the room gets in the freezer when
the doors are opened. Humidity build up will be faster when you open the doors
more frequently, especially if the humidity of the room is high.
• Building up of water drops on the rear wall after automatic defrosting is normal. (in
Static Models)
If the door is not opened and closed properly;
• Do the food packages prevent closing of the door?
• Are the door compartments, shelves and drawers placed properly?
• Are door joints broken or torn?
• Is your freezer on a level surface?
If your freezer is not cooling enough;
Your freezer is designed to operate in the ambient temperature intervals stated in the
standards, according to the climate class stated in the information label. We do not
recommend operating your fridge out of stated temperatures value limits in terms of
cooling effectiveness.
IMPORTANT NOTES:
• Compressor protection function will be activated after sudden power breakdowns or
after unplugging the appliance, because the gas in the cooling system is not stabilized
yet. Your freezer will start after 5 minutes, there is nothing to worry about.
• If you will not use your freezer for a long time (e.g. in summer holidays) unplug it.
Clean your freezer according to Chapter 4 and leave the door open to prevent humidity
and smell.
• If the problem persists after you have followed all the instructions above, please
consult to the nearest Authorized service.
• The lifetime of your appliance stated and declared by the Department of the Industry
is 10 years (the period for retaining parts required for the proper functioning of the
appliance).
Climate Class
T
ST
N
SN
EN - 62 -
Ambient Temperature (°C)
Between 16 and 43 (°C)
Between 16 and 38 (°C)
Between 16 and 32 (°C)
Between 10 and 32 (°C)

Publicidad

loading