Terapio+ KTR-2230 Manual Del Usuario página 15

The device turns
on but then
turns off
The device does
not turn on,
but generates
electrical
impulses
The device
does not turn
on despite new
batteries
Cleaning, storage and
replacement parts
adhesive electrodes
• To ensure that the electrodes remain adhesive for as
long as possible, clean them carefully with a damp,
lint-free cloth or clean the underside of the electrodes
under lukewarm, running water and pat dry with a
lint-free cloth. Before cleaning with water, remove the
connection cables from the electrodes.
• Reapply the electrodes to the carrier foil following
treatment.
cleaning the device
• Remove the batteries from the device before cleaning.
• Clean the device after use with a soft, slightly damp
cloth. If it is very dirty, you can also moisten the cloth
with a mild soapy solution.
• Do not use any chemical or abrasive cleaning agents.
The batteries
are not inserted
correctly
The batteries
are flat; the cord
is defective or
not properly
connected.
The duration of
the treatment
has elapsed
13
Reinsert the
batteries or
replace them
Replace the
batteries or
cord; connect
the cord
properly
Switch off the
device and then
switch it back
on again
The device
does not turn
on despite new
batteries
Contact
customer
service