Owner's Manual |
Ignition | Battery Powered
!
WA r n I n G
Do not lean over the appli-
ance while lighting.
!
WA r n I n G
If ignition does NOT
occur in 5 seconds, turn
burner controls OFF, wait
5 minutes and repeat
lighting procedure.
If burner does not ignite with
open valve, gas will continue
to flow out of burner
and could accidentally/
inadvertently ignite with
risk of injury.
28
IGnITIon |
BAT TErY PoWErED
PROPANE BURNER OPERATION
For proper ignition and operation of the appliance follow the steps below.
S T E P 0 1
In order for the ignitor
button to work properly, ensure that
the battery is installed correctly.
S T E P 0 2
❶ Ensure that the control knob is
turned to OFF.
S T E P 0 3
Ensure that the LP
tank is properly connected to the
unit. Turn gas ON at the LP cylinder
by slowly turning the OPD hand-
wheel halfway.
S T E P 0 4
❷ Push and hold the ignitor button.
❸ Push and turn the control knob counter-clockwise to HIGH.
(Release the ignitor button when the burner lights.)
❹ Adjust the temperature to desired level.
❷
one half turn
❶
❸
❹
Model 1845