Modular EM70/40 CPE Instalación, Uso, Mantenimiento página 24

15. REMINDERS FOR THE MAINTENANCE
TECHNICIAN
THE MANUFACTURER WILL NOT BE
LIABLE FOR ANY DAMAGE OR
INJURY RESULTING FROM FAILURE
TO OBSERVING THE FOLLOWING
RULES.
Identify the specific appliance model. The model
number is detailed on the packing and on the
appliance dataplate.
The appliance must be installed in a well-ventilated
room.
Do not obstruct any air vents or drains present on
the appliance.
Do not tamper with appliance components.
Appliance maintenance and conversion to a
different type of gas must be carried out by
qualified technicians
manufacturer, in compliance with current safety
standards and the instructions in this manual.
16. CONVERSION TO ANOTHER TYPE OF
GAS
See Chapter " Instructions for installation ".
17. COMMISSIONING
See Chapter " Instructions for installation ".
18. TROUBLESHOOTING
GAS PASTA COOKER
THE PILOT BURNER DOES NOT LIGHT.
Possible causes:
- Insufficient gas supply pressure.
- Blocked tubing or nozzle.
- Defective gas tap or valve.
- Igniter defective or not properly connected.
- Igniter or igniter wire defective.
authorized by the
PILOT BURNER GOES OUT DURING USE.
Possible causes:
- Insufficient gas supply pressure.
- Defective gas tap or valve.
- Defective thermocouple or insufficient heating.
- Thermocouple incorrectly connected to gas tap or
valve.
- The gas cock and/or gas valve knob is not being
pressed enough.
THE MAIN BURNER DOES NOT LIGHT (EVEN
THOUGH PILOT IS LIT).
Possible causes:
- Insufficient gas supply pressure.
- Blocked tubing or nozzle.
- Defective gas tap or valve.
- Defective burner (gas outlet holes clogged).
- Defective pressure switch.
- Defective energy regulator.
HEATING CANNOT BE ADJUSTED.
Possible causes:
- Defective energy regulator.
ELECTRIC PASTA COOKER
THE APPLIANCE DOES NOT HEAT.
Possible causes:
- Defective heating element.
- Defective energy regulator.
- Defective pressure switch.
HEATING CANNOT BE ADJUSTED.
Possible causes:
- Defective energy regulator.
19. REPLACING COMPONENTS
REMINDERS FOR REPLACING COMPONENTS
SHUT THE GAS SHUT-OFF VALVE
AND/OR SWITCH THE APPLIANCE
OFF
INSTALLED UPSTREAM.
24
AT THE MAIN SWITCH