Publicidad
Idiomas disponibles
Idiomas disponibles
Ice
making
normal
There
is
water
in
water-box
The water tank
overflowed
the refrigerator
E2
There is water in
the water box
Just
running
water,
cooling or a little
cold
Magnetic
switch damaged
The ice guide plate is
not reset
is
The fourth ice cycle
stops
The drain plug is not
no
installed correctly
the
External water supply Check the water supply
External water supply
into
Use tap water as a
source of water
There is no water, nor
does the shower pipe
run
There is thin ice on the
ice mold
There is thick ice on the
not
ice mold
Some water splashed
into the refrigerator
The back of the water
box is leaking into the
sensitive
Replace
sensitive switch
Reset ice guide plate
Replace the magnetic sensitive
switch
Install drain plug correctly
The water valve above the tank
does not rotate horizontally
The external water pressure is
too high to cause the float valve
to work,
pressure or change a new valve
The pump is seriously blocked,
should be replaced or cleaned
The shower pipe is blocked.
Clean it up
Increase manufacturing time by
pressing the "+" button on the
operating panel
Reduce manufacturing time by
pressing the "-" button on the
operating panel
Rotate and adjust the shower
pipe
Adjust the installation position of
the water box
- 12 -
the
magnetic
reduce
the
water
Publicidad
