Atlantic NANTO Manual De Instrucciones página 5

5. CONTROL AND HUMAN MACHINE INTERFACE
•
Models: SWH 10A M-N1 / SWH 10U M-N1 / SWH 15A M-N1 / SWH 15U M-N1 / SWH 30A M-N1 / SWH 30U M-N1
•
Models: SWH 15A M-N3 / SWH 30A M-N3 / SWH 15A M-N4 / SWH 30A M-N4
- PLEASE NOTE: If the device is inactive for 60 seconds, the LED indicators of the Water Drop will be turned off and the
circle around the selected mode will start to blink on the HMI. The indication on the Water Drop will be reactivated if a button
is used or if the appliance is heating.
Indicators Indicator status
On
On
On
Segments of the
water drop
lightening one
after another
On
Blinking
Top segment is lit
in orange
•
Adjusting the temperature: The temperature of the water may be adjusted by
turning the front knob. Allow half an hour for the temperature to stabilize between
settings. Maximum temperature is achieved with the knob turned fully clockwise. The
red LED light shows when the heating element is working, under control of the
thermostat, when the water reaches the preset temperature, the thermostat
deactivates the heating element automatically and Blue LED lights ON to indicate
the water is ready for shower.
•
Eco mode (depending on models): The ECO position on the regulation knob
corresponds to a water temperature of 50 - 55°C which allows more energy savings
while preventing scale build up and extending the heating element lifetime.
BOOST mode
Absence mode
(anti-freezing)
Absence mode activated: The water heater is frost-protected (7°C). The BOOST
function is deactivated.
Manual mode selected:
To set the temperature of hot water, touch the buttons until the desired level is selected
on the Water Drop LEDs (5 levels available).
ECO+ mode activated; the water heater starts reading consumption to adapt to the
needs of the user and ensure energy savings, whilst guaranteeing comfort levels.
The BOOST function is activated by a quick press. Activating the BOOST mode sets the
heating temperature to the Max level for 1 hour. After the heating is done, the appliance
will return to the mode that was selected before activation of the BOOST mode.
The appliance is not heating water. The lit segments show the quantity of available hot
water.
The appliance is heating water to reach the required level. The fixed lit segments show
the quantity of available hot water.
The appliance is malfunctioning. Check the list of error codes below or contact the after-
sales services
Meaning
3
Available hot water and
heating indicators
(Water Drop)
ECO+ mode
Manual mode