Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Identification data
Product
Version
Date created
2.
General information
Read and observe the operating instructions, keep them as a reference for
later and ensure they are accessible at all times.
2.1.
SYMBOLS AND MEANS OF REPRESENTATION
Indicates a hazard which if not avoided may lead to
WARNING
death or serious injury.
i
Indicates useful tips and instructions together with in-
formation for efficient and problem-free operation.
3.
Safety
3.1.
GROUPED SAFETY MESSAGES
3.1.1.
Battery
CAUTION
Leaking electrolyte
Eyes and skin irritation can occur due to leaking, poisonous and corrosive electro-
lytes.
▶ Avoid contact with your eyes and body.
▶ In the event of contact, rinse out the affected area immediately with plenty of
water and consult a doctor.
3.2.
INTENDED USE
Dimmable LED battery head lamp with movement sensor.
For both industrial and private use.
Protected against dust and sprayed water to IP 65.
Shock-resistant to IK 07.
3.3.
REASONABLY FORESEEABLE MISUSE
Not suitable for use by children.
Do not use in potentially explosive atmospheres.
Do not expose to strong heat, direct sunlight or open fire.
If the casing is damaged, do not continue to use the work lamp.
Do not open the casing.
Do not replace the light bulb.
4.
Device overview
A
1 USB-C charging port 2 Movement sensor display 3 Main beam 4 Charge status
indicator 5 On/Off button 6 Movement sensor button 7 Headband
5.
Commissioning
5.1.
CHARGING THE BATTERY
i
Fully charge the rechargeable battery before using it for the first time.
ü Torch switched off.
1. Use the USB cable to connect the USB-C charging port on the lamp to the power
supply.
▶ Whilst the torch is being charged, the charge status indicator lights up red.
▶ When charging is complete, the charge status indicator light up continuously
green.
2. Disconnect the lamp from the power supply.
6.
Operation
LED risk group 1 - IEC 62471
WARNING
Risk of blinding and injury to the retina
▶ Never look directly into the light beam.
▶ Do not direct light beam at animals' or people's eyes.
▶ In the event of commercial use, the user must be instructed according to the ac-
cident prevention regulations.
6.1.
SWITCHING THE MAIN BEAM ON AND OFF
1. Press the ON/Off button to switch on "ECO mode" (approx. 100 lm).
2. Press the ON/Off button to switch on "Full power mode" (approx. 300 lm).
3. Press the On/Off button to switch off the main beam.
6.2.
ACTIVATING THE MOVEMENT SENSOR
1. Press the movement sensor button.
2. Move the hand in front of the movement sensor (at a distance of 0 to 3 cm).
▶ The lamp will switch to "Full power mode".
7.
Storage
Before placing the lamp in storage, fully charge the battery. Store at temperatures
between -10°C and +40°C. Do not store in the vicinity of acidic, aggressive, chemical
substances, solvents, humidity and dirt.
LED battery head lamp
02 Original operating instructions
05/2022
8.
Cleaning
Disconnect from the power supply before starting cleaning. Clean with a slightly
damp cloth. Do not use chemical, alcohol-based, abrasive or solvent-based cleaners.
9.
Technical data
Torch
Illumination
Illumination duration
LED
Colour temperature
CRI
Indices of protection
Ambient temperature range
Battery
Battery
Charging duration
Charging voltage DC/current
10. Recycling and disposal
Torch and rechargeable battery must not be disposed of in domestic waste.
Comply with the national regulations for disposal. Torch and rechargeable
battery must be taken to a suitable collection point.
ECO mode – approx. 100 lm
Full power mode – approx. 300 lm
ECO mode – approx. 6 h
Full power mode – approx. 2 h
COB LED
6500 K
80
IP 65, IK 07
-10°C to +40°C
Li-ion 3.7 V, 1500 mAh, 5.55 Wh
Approx. 2.5 h
5 V, 1 A
www.hoffmann-group.com
de
en
bg
cs
da
es
fi
fr
hu
hr
lt
it
nl
no
pl
pt
ro
ru
sk
sl
sv
5
Publicidad
