Publicidad
Idiomas disponibles
Idiomas disponibles
GB
MT
f) Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working con-
ditions and the work to be per-
formed. Use of the power tool for
operations different from those inten-
ded could result in a hazardous situ-
ation.
h) Keep handles and grasping
surfaces dry, clean and free
from oil and grease. Slippery
handles and grasping surfaces do not
allow for safe handling and control of
the tool in unexpected situations.
5. SERVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
Safety instructions for flat
dowel cutters
• Disc cutters must be rated for at
least the speed specified on the
power tool. Disc cutters running at
overspeed can fly apart and cause in-
juries.
• Always use the guard cover.
A guard cover protects the user from
broken off parts of the disc cutter and
from accidental contact with the cutter.
• Hold the power tool by the in-
sulated handles as the cutter
may hit its own power cord.
Contact with a live wire can also cause
a charge in metal parts of the tool and
result in an electric shock.
26
• Always use disc cutters of the
correct size and with a match-
ing locating hole. Disc cutters that
do not match the mounting parts of the
cutter run unevenly and lead to loss of
control.
• Move the power tool against
the workpiece only when it is
switched on. Otherwise, there is a
risk of kickback if the attachment tools
jam in the workpiece. If you switch on
the power tool while the router blade is
touching the workpiece, kickbacks will
occur.
• Do not put your hands in the
cutting area and neither on
the cutter. Hold the additional
handle with your other hand.
When holding the milling cutter with
both hands, they cannot be injured by
the cutter.
• Never mill over metal objects,
nails or screws. The milling cut-
ter can be damaged and lead to in-
creased vibrations.
• Use suitable detectors to de-
termine if there are hidden sup-
ply lines or contact the local util-
ity company for assistance. Con-
tact with electric cables can cause fire
and electric shock. Damaging gas lines
can lead to explosion. Breaking water
pipes causes property damage.
• Hold the power tool tightly
with both hands while working
and ensure a secure footing.
The power tool is guided more securely
with both hands.
• Secure the workpiece. A work-
piece clamped with clamping devices
or in a vice is held more secure than by
hand.
• Wait until the power tool has
stopped before placing it
Publicidad
