Publicidad
Idiomas disponibles
Idiomas disponibles
Row
Hardware
4
M6* 60mm Screw
5
M6* 60mm Concrete anchor
6
Cable keeper
7
Nut cap
8
9
M6* 16 Washer
Installation instructions
Step1 – Determine the appropriate screws for your TV
1. Carefully place your TV screen face-down on a soft place, clean that surface to protect the
screen from any damages and scratches.
2. If your TV has a table-top stand attached, remove the stand. See the documentation that
came with your TV for instruction.
3. Temporarily lay the brackets on the back of your TV.
4. Align screws, brackets and TV with the mounting screw holes.
5. Remove the vertical brackets.
Step 2- Select screws, washers, and spacers
1. Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs
come with number of hardware included. (If there are screws that came with the TV, there are
almost always in the holes on the back of the TV). If you don't know the correct length of the
mounting screws your TV requires, test various sizes by hand threading the screws.
2. Select one of the following types of screws:
M4* 12 mm Screw (10)
M4* 30 mm Screw (11)
M5* 12 mm Screw (12)
M5* 30 mm Screw (13)
M6* 12 mm Screw (14)
M6* 30 mm Screw (15)
Use washers for all screws.
• For an irregular or obstructed TV back, you can use some spacers.
Caution: use the correct length of screws for installation. If you doubt about installation by your-
self, stop immediately and contact to customer service. Using hardware that is too long may
Q.ty
Level
Row
4
10
M4* 12mm Screw
4
11
M4* 30mm Screw
2
12
8
13
1
14
4
15
M6* 30mm Screw
Hardware
M5* 12mm Screw
M5* 30mm Screw
M6* 12mm Screw
Q.ty
4
4
4
4
4
4
Publicidad
