Publicidad
Idiomas disponibles
Idiomas disponibles
4. Make sure that your TV stand resistantly on the body.
Step 7 – Making adjustment and managing cables
1. You can change the Tv position vertically by three screws that assembled on the brackets.
Cause of clamps on the nuts you can change that position just by hand easily.
2. When you sure that your TV is standing in place that you want, tighten the screws and nuts
to prevent unwanted movement.
3. Put nut caps on every nut for making the best perspective for your decoration.
4. Manage all cables by two cable keepers which are in your packet. Put cable keepers to two
profiles and then pass cables from inside of cable keeper to prevent any slack, routing
5. cables along the arms and providing a clean look to your installation.
Removing the TV from the wall mount
To remove your TV from the wall plate assembly, disconnect all cables and then reserve the proce-
dures in step 7.
Publicidad
