Irradio STV-IR-3255-3 Manual Del Usuario página 9

ENG
STV-IR-3255-3
32" (81cm) to 55" (140cm) TV wall mount – full motion
ASSEMBLY GUIDE
Please, read the instructions carefully and keep them for future reference.
Do not use this appliance for purposes other than those described.
Safety information and specifications
CAUTION: Do not use this product for any purpose not explicitly specified.
Using for other cases may cause properly damage or personal injury. On the other side if you cannot
understand of instruction or doubts about safety of this, contact to your customer service or call a
qualified contractor. Melchioni is not responsible for any damage or injury due to incorrect instal-
lation or use. The weight of your TV should not be more than 40 kg. The wall must be capable of
supporting weight of your TV and wall mount together. Keep these times away from young children.
You will need the following tools to assemble your TV wall mount:
Drill
Measuring tape and pencil 8/32" (8mm) drill bit Socket wrench (13mm)
Screwdriver Hammer Level
Package contents
Make sure that you have all the hardware necessary to assemble your TV wall mount:
1- Vertical assembled Brackets (Qty. 2)
2- Base assembled arm (Qty. 1)
3- Hardware including Nuts, Bolts
and accessories in plastic package (Qty. 1)