Publicidad
Idiomas disponibles
Idiomas disponibles
damage your TV and on the other hand using too short may cause your Tv fall from the
mount and do damage or injuries.
3. Remove the screws for fitting other steps.
Step 3- attaching the vertical brackets to TV
1. Align TVs holes on the bracket holes with screws on the back of TV. The brackets must be
level.
2. Place washers M6 16 mm (6) concentric and align on the holes of brackets and then insert
the screws (10-11-12-13-14-15) through the washers.
3. Tighten the screws until fasting brackets to TV. Notice that do not over tighten.
Step 4 – Determine wall-mount location
Place TV at the center of the wall plate at the arm, before drill holes.
1. Measure the distance from the bottom of TV to the middle of four mounting screw holes. This
is measurement.
2. Choose the exact place on the wall that related to your design. In this part, measure the bot-
tom of TVs place that you want from the floor. But notice that Tv should place above any fur-
niture such as (TV stand, decoration box, blue ray box and speaker box).
• Top of the Tv should be level.
3. At the end of this step use pencil to mark TV spot on the wall.
Publicidad
