Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Remove the transport bolts
You must remove all the transport bolts from the rear before using
your appliance for the first time. Otherwise, the product may
produce unusual movement and vibration, as these transport bolts
are used to prevent the appliance drum from being damaged
during transportation.
Note: Once all transport bolts have been removed, please store
them in a safe place for re-installation in case the appliance is
transported again.
Loosen the transport bolts with
a spanner.
Levelling
Once you have positioned the appliance in its normal place of operation, make sure that it is completely
level. To do this, you should use a spirit level. If the appliance is not completely level, you should adjust
the legs according to the following figure:
1.
2. Turn the foot until it reaches the floor
3. Adjust the feet and lock the nuts with a spanner.
Electrical connection
This appliance must be grounded for safety. The power cord of this appliance is equipped with a
three-prong plug that fits into a standard three-prong outlet to minimize the possibility of electric shock.
Do not, under any circumstances, cut or remove the third grounding prong from the supplied power
cord.
Do not cut or remove the third grounding prong of the supplied power cord under any circumstances.
This appliance requires a standard 220-240V-50/60Hz three-prong grounded outlet. The cord must be
secured behind the appliance and must not be left unattended. appliance and should not be left
exposed or dangling, thus avoiding accidents and/or injuries.
Never unplug the appliance by pulling on the power cord. Always grasp the plug firmly and pull it out. Do
not use an extension cord with this appliance. If the power cord is If the power cord is too short, have a
qualified electrician or serviceman install an outlet near the appliance. The use of an extension cord may
adversely affect the performance of the unit.
Remove the bolts, including the
rubber parts, and save them for
possible future use.
Loosen the counter nut
25
Plug the holes with the rubber
plugs.
English
infiniton.es
Publicidad
