Before use
Before first wash cycle
We strongly recommend that before starting a wash cycle for the first time, you remove any residual
water that may remain in the washing machine as a result of the tests and quality controls carried out
by the manufacturer. From Infiniton we recommend that you start a short wash cycle are clothes.
To do so:
1.
Open the water inlet tap to the washing machine.
2. Close the door.
3. Put some detergent, approximately 30 ml. In the detergent compartment.
4. Select and start a short programme.
Before each wash
The ambient temperature of the washing machine should be between 5 - 40°C. If used below 0°C, the
inlet valve and drain system may freeze and cause damage to the appliance.
If the machine is installed in conditions where there is a risk of freezing, it must be installed immediately
in a new location where the ambient temperature is above 5°C, thus ensuring that the water supply and
drain hoses can be thawed before use.
Check clothing care labels.
Close the zips, buttons and
hooks. Loose belts and ties
should be tied.
WARNING! Do not put clothes that have been in contact with combustible or flammable
substances such as wax, oil, paint, petrol, alcohol, paraffin and other flammable materials into the
washing machine.
WARNING! Washing loose laundry can create an imbalance in the drum. Always wash more than
one laundry item to make the spinning run smoothly.
Note: Refer to the laundry care labels and detergent usage instructions before washing. Use a
non-foaming or low sudsing detergent suitable for machine washing properly.
1
Sort clothes by colour and
type of fabric.
4
Place small garments
(stockings, belts...) and
garments with hooks (bras)
in a special fabric bag.
2
Remove all items that may
be contained in pockets of
clothing.
5
Wash long-haired
garments and garments
that are susceptible to
susceptible to pilling, inside
out.
29
English
3
6
infiniton.es