Operational Cautions - Hitachi Koki CG 36DL Manual De Instrucciones

English
3. Speed dial
A speed dial for changing the rotational speed in
the range of 5,000 – 7,000 rpm is provided on the
housing. Turn the dial clockwise to increase the
speed and counterclockwise to reduce the speed.
(Fig. 34)
4. Trimming grass
Grip the handle from above, press the lock lever
and pull the lever to start nylon head rotation.
(Fig. 35)
Lock lever
Release the lever when you finish trimming and
stop the motor.
Place your thumb on the loop handle and grip the
handle with your other fingers. (Fig. 36)
Take a posture that makes it easy to move.
[Grass trimming techniques]
Do not swing the pipe, but use the hips to move the
nylon head horizontally from right to left in an arc
while going forward and use the left side of the nylon
head for cutting grass. (Fig. 37)
22
Switch Panel
Speed dial
Fig. 34
Lever
Fig. 35
Fig. 36

OPERATIONAL CAUTIONS

Continuous work
This gardening appliance comes with an over-heat
protection circuit that protects the electronic parts
that control the rechargeable battery. In continuous
trimming work, gardening appliance temperature
will rise and eventually trigger the over-heat
protection circuit, which will shut down the
gardening appliance.
If this happens, let the gardening appliance cool
for a length of time. When the temperature drops,
it will again become possible to use the gardening
appliance. When the rechargeable battery has to
be exchanged during continuous operation, let the
gardening appliance rest for about 15 minutes.
Overload Protection
This gardening appliance comes with an overload
protection circuit to protect the electronic parts
controlling the gardening appliance. In continuous
overload during trimming work (locking the nylon
head, etc.), the overload protection circuit shuts
down the motor. If this happens, turn OFF the
power, and then resolve the problem causing the
overload.
The power lamp blinks if the lever is pressed after
the motor has stopped (see page 15, "ABOUT
POWER LAMP"). The power automatically turns
OFF if the power lamp blinks longer than 5 seconds.
If this happens, resolve the problem causing the
overload, and then switch the power button ON to
resume using the gardening appliance.
Carrying the gardening appliance (CG36DAL(L) only)
CAUTION
When retracting the main pipe, be careful of the
pointed end and take care not get your fingers
caught.
Release the locking lever and retract the main pipe.
Lock the locking lever until the projection hits the
main pipe. This procedure allows you to reduce
the gardening appliance to a compact size.
(Fig. 38)
Fig. 37