Publicidad
Idiomas disponibles
Idiomas disponibles
•
Do not use an air hose used to sup-
ply compressed air containing oil to
supply air tools not designed for
operation on compressed air con-
taining oil.
•
Do not fill tires with compressed air
containing oil.
A
Risk of burns from the sur-
faces of parts carrying compressed
air!
•
Let tool cool off before servicing.
A
Risk of personal injury and
crushing by moving parts!
•
Do not operate the electric tool with-
out installed guards.
•
Please note that the compressor will
start automatically when the pres-
sure falls off to minimum! – discon-
nect from power supply prior to any
servicing.
•
Ensure that when turning ON (e.g.
after servicing) no tools or loose
parts are in the electric tool.
A
Hazard generated by insuffi-
cient personal protection gear!
•
Wear hearing protection.
•
Wear protective spectacle.
•
Wear mask respirator when work
generates dust or mist detrimental
to health.
•
Wear suitable work clothes. When
working outdoors wearing of non-
slip shoes is recommended.
A
Hazard generated by electric
tool defects!
•
Do not make any changes to the
compressor. Any modification to
pressure-carrying
renders the type examination test
null and void. Repairs to compres-
sors and air tools must be carried
out by authorised specialists only.
•
Keep electric tool and accessories
in good repair. Check and service
the
compressor
Observe the maintenance instruc-
tions.
•
Priot to any use check the electric
tool for possible damage: before
using the electric tool carefully
check safety devices, protection
devices or slightly damaged parts
for proper function as specified.
•
Check to see that all moving parts
work properly and do not jam. All
parts must be correctly installed and
meet all conditions necessary for
the proper operation of the electric
tool.
•
Damaged protection devices or
parts must be repaired or replaced
by a qualified specialist.
•
Have damaged switches replaced
by a service centre.
•
Do not operate electric tool if the
switch can not be turned ON or
OFF.
•
Keep handles free of oil and grease.
3.3
Symbols on the machine
Information on the nameplate
19
20
21
22
23
24
25
26
(19) Manufacturer
(20) Item no., version no., serial no.
(21) Machine designation
components
(22) Supply voltage / frequency
(23) Motor capacity P
(see also "Technical Specifica-
tions")
(24) Fuse protection / protection class
(25) No. of cylinders
periodically.
(26) Motor speed
(27) Suction capacity
(28) Filling rate
(29) Speed compressor pump
(30) Max. pressure
(31) Pressure vessel volume
(32) Year of make
(33) CE-mark – This machine complies
with the EU Directives as per dec-
laration of conformity
Danger!
Disregard of the following
warning
may
cause
severe injury or material
damage.
Read instructions.
27
28
29
30
31
32
33
1
ENGLISH
3.4
Safety devices
Safety valve
The spring safety valve (34) is incorpo-
rated into the pressure switch unit. The
safety valve opens if the max. permissi-
ble pressure is exceeded.
4. Operation
4.1
Prior to initial operation
Install wheels (Classic 250)
1.
Install wheels as illustrated.
Check condensate drain
•
Check to see that the condensate
drain's screw (35) is closed.
35
4.2
Installation
The place of installation must meet the
following requirements:
•
dry, cool, protected from freezing
•
firm, level and even ground
A
Danger!
Incorrect installation can cause bad
accidents.
•
Secure compressor against mov-
ing away and tipping over.
34
11
Publicidad
