Descargar Imprimir esta página

Greencut GHT56LI-ION Manual De Instrucciones página 71

Publicidad

Idiomas disponibles

Idiomas disponibles

GENERAL SAFETY RULES
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire or/and serious injury.
Save all warnings and instructions for future reference. The term "power tool"
in the warnings refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power
tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or fumes.Keep children and bystanders away while
operating a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while
you are tired or under the influence of drugs, alcohol or
medication. A lapse of attention while operating power tools
may result in serious personal injury. Use personal protective
equipment. Always wear eye protection. Protective equipment
such as dust mask, gloves, non-skid safety shoes, hard hat or
hearing protection used appropriately will reduce personal
injuries.
Prevent unintentional starting: Ensure the switch is in the off
position before connecting to power source and/or battery
pack and when picking up or carrying the tool. Carrying
power tools with your finger on the switch or energizing power tools that have the switch on
invites accidents.
Remove any adjusting key or wrench before turning the power tool on: A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
Do not over-reach: Keep proper footing and balance at all times. This enables better control of
the power tool in unexpected situations.
Dress properly: Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
71
EN

Publicidad

loading