Publicidad
Idiomas disponibles
Idiomas disponibles
72
POWER TOOL USE AND CARE
1. Do not force the power tool. Use the power tool for the application. The correct power tool
will do the job better and safer at the rate for which it was designed.
2. Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled withthe switch is dangerous and must be repaired.
3. The battery pack from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
4. Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
•
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tool's operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained power tools.
•
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
•
Use the power tool, accessories and tool bits etc.in accordance with hese instructions, taking
into account the working conditions and the work to be performed. Use of the power tool for
operations different from those
BATTERY TOOL USE AND CARE
•
Ensure the switch is in the off position before inserting battery pack. Inserting the battery pack
into power tools that have the switch on invites accidents.
•
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when used with another battery pack.
•
Use power tools only with specifically designated battery packs. Use of any other battery packs
may create a risk of injury and fire.
•
When battery pack is not in use, keep it away from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects that can make a connection from one terminal to
another.
•
Shorting the battery terminals together may cause burns or fire.
•
Under abusive conditions, liquid may be ejected from the battery;avoid contact. If contact
accidentally occurs, flush with plenty of soap and water. If liquid contacts eyes, immediately seek
medical help. Liquid ejected from the battery may cause irritation or burns.
SERVICE
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
intended could result in a hazardous situation.
Publicidad
