Publicidad
Idiomas disponibles
Idiomas disponibles
Connectivity
With your mobile device, get the KitchenAid app, connectivity setup instructions, terms of use, and privacy policy by scanning the QR.
IMPORTANT: Proper installation of your appliance prior to use is your responsibility. Be sure to read and follow the Installation
Instructions that came with your appliance.
Connectivity requires Wi-Fi and account creation. App features and functionality subject to change. Data rates may apply. If you have any
problems or questions, contact customer support at 1-866-333-4591.
You Will Need:
� A home wireless router supporting Wi-Fi, preferably 2.4 Ghz with WPA2 security. If you are unsure of your
router's capabilities, refer to the router manufacturer's instructions.
� The router to be on and have a live internet connection.
SET UP
� The SAID code and MAC address for your appliance may be needed. The SAID code and MAC address can
be found in the Settings button with below instructions, or you can find it on your appliance in the upper left
corner of the door, see below illustration 1.
� Mobile device with bluetooth connection capability with bluetooth turn on.
� Latest version (recommended) of the app.
How to find the SAID code and MAC address in Setting:
Finding the SAID code and MAC address through Settings–>Connectivity–>SAID code and
MAC address.
Once installed, launch the app. You will be guided through the steps to set up a user account and to connect your appliance. If you have
any problems or questions, contact customer support at 1-866-333-4591.
Steam Clean
This automatic cleaning cycle will help you to clean the microwave oven cavity and to remove unpleasant odors.
Before starting the cycle:
1. Remove all accessories from the cavity.
2. Put 250 mL water into a container (see our recommendations in the below section "Tips and suggestions").
3. Place the container directly on the middle of the oven bottom.
4. Close the door.
To Start the Cycle:
1. Press Steam Clean button.
2. Press the Start button to start the function.
When the Cycle is Finished:
1. Press the Cancel button.
2. Remove the container.
3. Use a soft cloth or a paper towel with mild detergent to clean the interior surfaces.
Tips and suggestions:
For a better cleaning result, it is recommended to use a container with a diameter of 17cm-20 cm, and a height that is lower than 6.5 cm.
It is recommended to use a container of light plastic material that is suitable for the microwave.
As the container will be hot after the cleaning cycle is completed, it is recommended to use a heat resistant glove when removing the
container from the microwave.
For a better cleaning effect and removal of unpleasant odors, add some lemon juice or vinegar to the water.
Illustration 1
B
A
A.
SAID code and MAC
address label
B.
Door
6
Publicidad
