Publicidad
Idiomas disponibles
Idiomas disponibles
Installation of the stove:
1. Retirez Remove combustible materials and flammable liquids or vapours from the
cooking area.
2. Place the stove on a solid, stable and level surface to ensure the stability of the
stove.
3. Open the pan supports fully.
4. The hose should be kept away from hot and sharp objects to prevent it from being
twisted.
5. The container compartment must be in the ventilation openings.
6. The gas cylinder must be changed away from any source of ignition.
7. To protect the surface, the temperature of the substrate should not exceed 50k.
8. Use screws and nuts to fix the burner to the frame.
9. Use screws and nuts to fix the three legs to the frame
10. Attach the valve to the burner
11. Attach three #6 screws to the burner to adjust the flame
Warning: Keep all combustible materials more than 1.2 metres away from the stove when
in use. Also keep flammable liquids and vapours away from the stove by more than 7.6
metres.
This stove can ignite combustible materials, flammable liquids or vapours and cause fire,
burns, serious injury or death. Keep the burner refill away from any heat source. Connect
the fuel refill as far away from the burner as possible. Use of the refill near the burner or any
heat source may result in explosion of the refill, fire, burns, serious injury or death.
Never attempt to light the stove with the control valve open. If the control valve is open,
close it immediately and ventilate the area before lighting the stove. Failure to do so may
result in an explosion, fire, burns, serious injury or death.
This appliance must be kept away from flammable materials.
Switching on the stove
1. Keep a lit match or lighter above the burner head.
10
Publicidad
