Descargar Imprimir esta página

WerkaPro CA-GB13 Instrucciones De Uso página 11

Cocina de gas

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14
2. Open the central control valve to release and light the inner burner.
3. If the burner did not light, close the control valve, wait 5 minutes and repeat step 1.
4. When the burner is lit, open the other control valve to light other burners.
5. To turn off the stove: turn the cylinder valve or regulator switch to the OFF
position, then close all control valves.
Warning: Never put your head or body over the lit stove. This is dangerous behaviour and
can result in fire, burns, serious injury or death.
Using the stove for cooking
1. Put food or liquids in a container (or cooking utensils).
2. Place the cookware in the middle of the cooker.
3. Turn the control valve to adjust the heat.
4. Turn off the gas supply in case of a gas leak.
5. The size of the utensils to be used is between 20 and 35 cm.
6. When handling particularly hot components, it is recommended to use protective
gloves.
7. Make sure that the stove is cleaned and maintained frequently. Only clean when the
stove is switched off and cold.
Warning: Never move the stove while it is on or still hot. Turn it off and wait more than 5
minutes until it is cool before moving it. Moving the hot or lit stove can result in fire, burns,
serious injury or death.
Never use a cooking utensil with a diameter greater than 22 cm.
Never combine one or more stoves. Never use an oven to heat empty or dry pots. Never use
a heat distributor from another supplier. Such use of the stove may result in fire, burns,
serious injury or death.
Never use a cookware size that is not suitable for the cooker - especially the pan support
(convex or concave bottom, some enamelled cookware, etc.). The use of unsuitable
cookware can lead to instability of the cookware or the cooker. They may fall off and cause
fire, burns, serious injury or death.
The part sealed by the manufacturer or his agent cannot be modified by users.
Leak test :
Perform a leak test whenever a new gas tank is connected or after a long period of non-use
of the product.
Ensure that the valve is correctly aligned and that the hose is not cracked, splitting or
misaligned before each use.
Important: If you cannot stop a gas leak, turn off the gas tank valve and call your local gas
supplier.
Make sure the leak is as far away from open flames or sparks as possible and avoid contact
with smoke.
11

Publicidad

loading

Este manual también es adecuado para:

11477