Publicidad
Idiomas disponibles
Idiomas disponibles
Gas breaker safety mechanism (versions with thermal element)
1. Pus the gas stove button and turn anticlockwise and bring it to the high flame position.
2. Switch on the lighter depending on the version of the stove.
3. After combustion, keep the button pressed for 3-5 seconds engage the safety mechanism.
4. If the combustion cannot be achieved after you press it, repeat the same procedure b
keeping the button pressed for 15 seconds.
5. Bring it to the desired flame position.
6. When the desired cooking expires, bring the button of the stove clockwise to the highest
point in order to switch on the stove burner.
Use of the gas furnace
Screen prints on the button on the control panel indicate the position of the button.
Figure 8
1- Push the button of the gas furnace anticlockwise and bring it to high flame and / or the heat
position on the panel.
2- If, as shown in the Figure 11, the furnace cock is controlled by the upper heater burner, then
push on the button and turn clockwise and bring it to the letter grill or flame sign.
3- Switch on the lighter depending on the characteristic of your furnace.
Thermal element cuts gas immediately by
engagement of the safety mechanism in
case of liquid overflow on the upper
burners.
Figure 9
Figure 10
20
Figure 11
V.1
Publicidad
