Publicidad
Idiomas disponibles
Idiomas disponibles
Step3:Start your car.
If you failed to start your car,you need to disconnect the battery clamp from the vehicle and the jump starter.wait for
at least 30 seconds,then try again.if you failed to start your car after 2 attempts.please contact the seller for
support
Step 4:
Once your car is started.remove the battery clamp from the car-battery and the jump starter within 30 seconds.
Car Battery Voltage Detection
When the smart clip is only connected to the car battery (the car battery voltage needs to be ≥8V), the "
symbol will light up, and the current battery voltage will be displayed at the same time.
7
"
Publicidad
