Publicidad
Idiomas disponibles
Idiomas disponibles
Trouble shooting
Issue
Can not jump start
LED light keeps flashing
Flashing is not working
No wall adaptor
No indicator Light
Cause
Wrong clamp connection
8-second timer to jump start has
expired
Low battery status
Protection circuit is working
Low battery
The unit is charging
Charge via USB cable
Low battery
Power bank in off mode
Remedy
Make sure to clamp the RED jumper cable to the
Postive(+)post on the battery.And Black jumper cable to
Negative(-)post or car interior.
Jump starter timed out,Disconned the cables from the vehicle
battery and reconnected
Recharge the unit via usb cable until at least three solid lights
or 51% charge
Refer to the status table on the indicator box or page 6 of the
maunal
Recharge the unit via usb cable
As a safety precaution,the flashlight light will not work while
the unit is charging.Please unplug the unit from charging or
wait until the unit finishes charging before using the light.
Plug the USB cable into computer or any USB 2A wall
adapter
Refer to Power level indicator on page 3 of the manual
Press the power on/off
12
12
Publicidad
