Publicidad
Idiomas disponibles
Idiomas disponibles
Term
No
Input low voltage protection
1
Input high voltage protection
2
3
Minimum identification resistance
Anti-charge protection
4
Reverse connection protection
5
6
Short circuit protection
High temperature protection
7
Technical
Other Instructions
Parameter
EC5 port voltage at no load, when the protection is triggered, the "
symbol will light up, and the buzzer will sound once every 1 second;
14.0V±0.5V
meanwhile, the current voltage value of the starting power supply will
be displayed.
EC5 port voltage at no load,When the protection is triggered, the "
17.5V±0.5V
character flashes, and the buzzer long beeps.
3±2Ω
The minimum resistance that the clamp can recognize.
Emergency power supply, voltage after ignition>voltage before
ignition, trigger protection; when protection is triggered
The "
△V ≥0.3V
sounds once every 1 second; after the fault is removed, it can be
restored to the standby state.
The red/black clip of the wire clip is reversely connected to the car
battery (battery voltage ≥0.8V), and the protection is triggered
Support
When the "
will sound once every 1 second; after the fault is removed, it can be
restored to the standby state.
In the standby state, the red and black clip ends are short-circuited,
and the symbol "
Support
The indicator flashes and the buzzer sounds once per second; after
the fault is removed, it can be restored to the standby state.
When the protection is triggered, the "
65±5℃/150±10℉
symbol will flash, and the buzzer will sound once every second
8
" symbol is on, the "
" symbol flashes, and the buzzer
" symbol is on, the "
" lights up, and the symbol "
" symbol flashes, the buzzer
"
" character will be on, the "
"
"
Publicidad
