ADJUSTMENT GUIDE
ADJUSTING THE SEAT POSITION
To move the Seat (No. 34) forward or
backward, while seated on the bike, put your
feet on the floor. Shift the Adjustment
Handle (No. 8) down to loosen. Move the
Seat (No. 34). Shift the Adjustment Handle
(No. 8) up to secure.
ADJUSTING THE LEVEL
If at any point the bike does not feel level, you
can adjust the Rear End Caps (No. 19).
ADJUSTING THE TENSION
Adjust the tension by rotating the Tension
Controller (No. 28a) clockwise to increase
the level of resistance. Rotate the Tension
Controller (No. 28a) counter-clockwise to
decrease the level of resistance.
Tension levels are set at Level 1 being the
lowest and Level 8 being the highest.
MOVING THE BIKE
Lift the bike by the Rear Stabilizer (No. 11)
until the transportation wheels on the Left &
Right Front End Caps (No. 16L No. 16R)
touch the floor. You can now move the bike to
your desired location with ease.
9