Sunny Health & Fitness Essential Interactive SF-RB422003 Manual Del Usuario página 6

Idiomas disponibles

We value your experience using Sunny Health and Fitness products. For assistance with parts or

troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY

(877-907- 8669).

STEP 2

NOTE: Make sure the Tension

Controller (No. 28a) is at the lowest

level before you connect the cable.

This ensures the cables are at their

longest point. We recommend the

assistance of a second person to help

hold the Handlebar Post (No. 2). This

will make the connection easier when

you are attaching Tension Hook (No.

20) to the Tension Cable (No. 28b).

Attach the Tension Cable (No. 28b)

into the lower metal bracket of

Tension Hook (No. 20) as shown in

Diagram G-1. Then pull Tension

Cable (No. 28b) upward and insert it

into the slot on the upper metal

bracket of Tension Hook (No. 20) as

shown in Diagram G-3. Make sure the

metal fitting on the Tension Cable

(No. 28b) is secured in the metal

bracket.

Connect the Sensor Wire (No. 21) to

the Sensor Extension Wire (No. 22).

Insert the Handlebar Post (No. 2) into

the post of the Main Frame (No. 1),

secure with 4 Arc Washers (No. 14),

4 Spring Washers (No. 55) and 4

Screws (No. 27). Tighten and secure

with Allen Wrench (No. 87).

NOTE: Do not cut or pinch any wires

when attaching the Handlebar Post

(No. 2). Ensure that all bolts and

washers are in place and partially

threaded in before completely

tightening any of them.