DeWalt DCH033 Traducido De Las Instrucciones Originales página 17

HEAVY-DUTY CORDLESS ROTARY HAMMER
DCH033, DCH133
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No-load speed
No-load beats per min
Single impact energy (EPTA 05/2009)
Maximum drilling range in steel/wood/
concrete
Core drill capacity in soft brick
Tool holder
Collar diameter
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to
EN IEC 62841-2-6:
Hammer Drill Mode
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Drilling into concrete
Vibration emission value a
h, HD
Uncertainty K =
Chiselling
Vibration emission value a
h, Cheq
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with a
standardised test given in EN IEC 62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However if the
tool is used for different applications, with different accessories or
poorly maintained, the vibration and/or noise emission may differ.
This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
WALT one of the
e
DCH033
V 18
DC
1
Li-Ion
min -1 0–1500
bpm 0–5500
J 2.0
mm 13/30/22
mm 50
SDS plus®
43
kg 2.27
dB(A) 90
dB(A) 98
dB(A) 3
= m/s 2 16.9
m/s 2 1.5
= m/s 14.7
2
m/s 1.5
2
and the accessories, keep the hands warm (relevant for vibration),
organisation of work patterns.
EC-Declaration of Conformity
Machinery Directive
DCH133
18
Heavy-Duty Cordless Rotary Hammer
1
DCH033, DCH133
Li-Ion
D WALT declares that these products described under
e
Technical Data are in compliance with:
0–1500
2006/42/EC, EN62841-1:2015+A11:2022, EN IEC 62841-2-6:2020
0–5500
+A11:2020.
2.6
These products also comply with Directive 2014/30/EU and
13/30/26
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
50 The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
SDS plus®
43
2.27
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
90
30.12.2022
98
3
THE SUPPLY OF MACHINERY (SAFETY) REGULATIONS
16.9
1.5
Heavy-Duty Cordless Rotary Hammer
14.7
D WALT declares that these products described under
e
1.5
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015+A11:2022, EN IEC 62841-2-6:2020 +A11:2020.
These products conform to the following UK Regulations
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
DECLARATION OF CONFORMITY
2008
DCH033, DCH133
WALT at the following
e
EnGLIsh
WALT at
e
WALT.
e
17 17