Descargar Imprimir esta página

Jata electro BT1056 Instrucciones De Uso página 9

Batidora electrónica trita

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
• This appliance has been designed for domestic only. Do not use
for periods of time over 3 minutes. After this time allow to cool
for some minutes before using it again.
• Under any circumstance introduce your hand on the jug being
the appliance switched on.
• Do not leave unattended while in use.
• Do not use the blender on empty.
• Don't allow children play with the appliance. Keep the
appliance out of the reach of children.
• Do not remove the jug with the food until the blade is totally
stopped and the appliance has been switched off.
• Manipulation or replacement of any component must be
performed by an authorized service centre.
• Make sure neither the appliance nor the cables are in direct
contact with hot surfaces or objects.
• Always place it on a flat surface.
• Always disconnect it from the mains when you do not use it
and before assembling / disassembling or when cleaning.
• High temperature contrasts could be the cause of broken jars,
avoid them to prolong the life of your glass jar.
• There are risks of injury in case of improper use. You must be
careful when handling the cutting blades, when the jug is
empty and during the cleaning.
• The cleaning and maintenance done by user can not be done by
children without any supervision.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid a danger.
INSTRUCTION OF USE
• Place the jug (3) on the main body (4) with the handle forwards.
• Pour the food into the jug and place the lid making coincide the longest edge with the handle. Close the
security flanges.
ATTENTION:
- Do not poor into the jug food or liquid too hot.
- To avoid spilling do not pour more than 2 litres into the jug.
• Plug the appliance into the mains. The ring (6) will light on and the light buttons will be flashing when the
blender is plugged to the mains and the jug placed.
• Activate the on lever (7).
• Turn the speed selector (5) clockwise between Min. and Max. position till getting the desired speed.
• You may add ingredients to the jug while in use without open the lid. To do so, remove the stopper (1). Turn
it slowly anti-clockwise and take it out. Add the ingredients into the jug and place again the stopper making
coincide the two flanges into the guides of the lid and turn it slightly anticlockwise.
9

Publicidad

loading