Chicco LULLAGLIDE Manual página 12

to sit up.
• WARNING: Always use
the restraint system.
• Always use the re-
straint system when
your child is in the
product; adjust the
length of the straps
as necessary.
• WARNING:
leave your child to
sleep in this product.
• This product does not
replace a bed or crib.
If your child needs to
sleep they should be
placed in a suitable
bed or crib.
When used with a car-
ry cot:
• Only use on a firm
ground which is hori-
zontal, level and dry.
• Do not let other chil-
dren play unattended
near the carry cot and
stand.
• Do not use if any part
of the stand is bro-
ken, torn or missing.
• NEVER use the prod-
uct as a highchair.
CARE AND MAINTENANCE
• This product requires periodical maintenance.
Never
• Cleaning and maintenance operations must only be car-
ried out by an adult.
• Periodically inspect the Lullaglide Stand to check for bro-
ken, torn or missing parts: if present don't use the product.
• Please refer to the care label for instructions on cleaning
the product.
30° C
COMPONENTS
A. Base
B. base connectors
C. legs
D. fabric cover
ASSEMBLY
WARNING: When performing this operation, ensure
that your child, or other children, are at a safe dis-
tance.
Make sure that the moving parts of the product do not
come into contact with your child during these opera-
tions.
1. To assemble the product the four metal legs must be at-
tached to the base of the stand. Insert the four legs in the
appropriate slots. Check that the letters (L, R) marked on
the plastic grafts on the legs match the letters marked on
the base (Fig. 1-fig.1A). A click will be heard once each leg
has been properly fastened to the base.
Next, fasten the two base connector tubes by inserting
the plastic grafts in the appropriate tracks. Check that the
letters marked on the plastic grafts (L, R) match those indi-
cated on the base (fig. 1B). For ease of insertion, pull on the
12
Hand wash
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean