Chicco LULLAGLIDE Manual página 13

plastic ring indicated in Fig. 1C.
FIXED OR ROCKING MODE
2. The Lullaglide Stand can be used in fixed or rocking
mode:
• Rocking mode: Press button A on both sides of the stand
(fig.2).
• Fixed mode: press button B on both sides of the stand.
(Fig. 2A)
DISASSEMBLY
3. To disassemble the product, first disconnect the base
connector tubes by pulling on the plastic ring while si-
multaneously pulling down on the tube to free the plas-
tic grafts. (fig. 3).
Next, disconnect the legs from the base by pressing on the
metal pin indicated in Fig. 3 A while simultaneously pulling
on the leg to free it from the base. Repeat the operation for
all the legs on the stand.
CONNECTING THE MYSA CARRYCOT
4. To connect the carrycot, make sure that the stand is in a
fixed position. (Fig. 2A)
Next, take hold of the handle in the transport position (ver-
tical and blocked) and position the carrycot on the base of
the stand, aligning the plastic grafts on the carrycot with
those found on the base of the stand (fig.4 components
A-B). Rest the carrycot on the frame until you hear the click
confirming that both of the grafts have locked into place
(Fig. 4A).
The carrycot can be attached facing in either direction.
WARNING: Before use, make sure that the carrycot is prop-
erly attached by pulling it upwards.
DETACHING THE MYSA CARRYCOT FROM THE LULLA-
GLIDE STAND
5. With the handle locked in the vertical position (carrying
position) press the buttons on the sides of the plastic
adaptors (Fig. 5) and lift it off the frame (Fig. 5A).
WARNING: The fastening and releasing operations can be
carried out also with your child inside the carrycot; howev-
er, the child's weight may make these operations more dif-
ficult. Pay attention when carrying out the aforementioned
operations.
ATTACHING BEST FRIEND LIGHT AND SEETY CARRY-
COTS AND KORY I-SIZE FAST IN CAR SEATS
6. To connect the carrycot/car seat, make sure that the
stand is in a fixed position. (fig. 2A).
Before attaching the carrycot / car seat, the Mysa Fast-in
adaptors will need to be connected to the Lullaglide stand.
Connect the adaptors by inserting the plastic part into the
lateral graft on the base (Fig. 6). Repeat the step on the
opposite side. Once the two adaptors have been properly
assembled on either side, the stand is ready to be attached
to the carrycot / car seat (Fig. 6A).
To connect the carrycot / car seat to the stand, grip the
handle in the carrying position (vertical and locked) and
position the carrycot / car seat on the adaptors (fig. 4 com-
ponents A-B); rest the carrycot / car seat on the frame until
a locking click confirms that both adaptors have locked into
place (Fig. 6B – 6C). If present, check that the "indicators" on
the plastic connectors both show the colour red.
The carrycot / car seat can be attached facing in either di-
rection.
WARNING: Before use, make sure that the carrycot / car
seat is properly attached by pulling upwards.
DETACHING THE CARRYCOT / CAR SEAT FROM THE
LULLAGLIDE STAND
7. With the handle locked in the vertical position (carrying
position) press the lateral release buttons (Fig. 5) and lift
the carrycot / car seat off the frame (Fig. 5A).
WARNING: for the Best Friend Light carrycot press the but-
ton found on the front of the carrycot base.
WARNING: The fastening and releasing operations can be
carried out also with your child inside the carrycot; howev-
er, the child's weight may make these operations more dif-
ficult. Pay attention when carrying out the aforementioned
operations.
DISCONNECTING THE ADAPTORS
8. To remove the adaptors pull on the internal lever and lift
upwards (Fig. 7).
CONNECTING THE MYSA SEAT
9. To connect the seat, make sure that the stand is in a fixed
position. (Fig. 2A)
The seat of the Mysa stroller can be attached to the Lulla-
glide stand for use as a reclined cradle.
To connect the seat to the Lullaglide stand it will need to
be connected to the lateral plastic grafts (fig. 4 components
A-B) until the locking click is heard (Fig. 8).
The seat can be assembled in either direction.
WARNING: Before using, make sure that the seat is proper-
ly locked on by pulling it upwards.
WARNING: Do not attach/remove the seat when your
child is sitting in it.
WARNING:
Always use the restraint system.
The use of the crotch strap and safety harness is necessary
to guarantee the safety of your child.
Always use the safety harness together with the crotch
strap.
DISCONNECTING THE MYSA SEAT
10. To release the seat press the buttons located on the seat
joints simultaneously and pull up. (Fig. 9)
WARNING: The child must never be sitting in the seat
when fastening/unfastening it.
13