Thermador PRD304GHC Manual De Instalación página 28

.
As the range is moved into its final, installed position,
verify that the "hook" on the Anti-Tip Bracket is in a
position to engage the back edge of the cast base (see
"Step 4: Installing the Anti-Tip Device" on page 11).
This can be verified by viewing through the opening
near the floor.
6. With the range in the installed position, the final height
adjustments are made to the two front legs to ensure
proper alignment to the counter top.
CAUTION! DO NOT operate range if sides are lower than the adjacent cabinet.
_This may damage the cabinet and counter top due to excessive temperatures.
!
/
CORRECT! Leveling legs should be adjusted so that the range
sides are at the same or higher level as the adjacent cabinet.
dO°£ © d
I
@ [?
Figure 30: Adjusting the Height of the Range
English 25