Specifications
Line Capacity ..................See Following Chart.
Cable Size
and Type
5
/
" Cable
8
3
/
" Cable
4
Drum Capacity...............100' of
125' of
Motor Type ......................Induction
Motor Rating
120V Motor ..................120VAC Single Phase
220-240V Motor ...........220-240VAC
No Load Speed ...............200 r/min (RPM)
Weight (Machine Only)...95 lbs.
Dimensions
Length..........................26"
Width............................21"
Height ..........................43"
Sound Pressure (L
)* .......58 dB(A), K=3
PA
Sound Power (L
)*...........59.3 dB(A), K=3
WA
* Sound measurements are measured in accordance with a standardized test per
Standard EN 62481-1.
- Sound emissions may vary due to your location and specific use of these
tools.
- Daily exposure levels for sound need to be evaluated for each application and
appropriate safety measures taken when needed. Evaluation of exposure lev-
els should consider the time a tool is switched off and not in use. This may sig-
nificantly reduce the exposure level over the total working period.
278-104-411.10_REV F
Recommended Line
Size and Reach
Line Size
Reach
3" to 6"
150'
4" to 8"
200'
3
/
" Cable or
4
5
/
" Cable
8
6.5 A, 60Hz
3.0 A, 50/60Hz, 425W
K-750 Drain Cleaning Machine
Handles
Motor
Drum
AUTOFEED
GFCI Cord
Foot Switch
Figure 1 – K-750 Drain Cleaning Machine with AUTOFEED
XXXXXXXXMMYY
Figure 2 – Machine Serial Number
The machine serial number is located on the rear drum
support. The last 4 digits indicates the month and year of
the manufacture. (MM = month, YY = year).
Standard Equipment
All K-750 Drain Cleaning Machines come with one pair of
RIDGID Drain Cleaning Gloves.
NOTI E
This machine is made to clean drains. If prop-
erly used it will not damage a drain that is in good condi-
tion and properly designed, constructed and maintained.
If the drain is in poor condition, or has not been properly
designed, constructed and maintained, the drain cleaning
process may not be effective or could cause damage to
the drain. The best way to determine the condition of a
Loading Wheel
Belt
Guard
Guide Tube
Kickstand
5