Dörr SNAPSHOT CLOUD PRO 4G Manual De Instrucciones página 33

07 | CAMERA SETTINGS IN THE APP/WEB INTERFACE
Camera Settings
Camera
Camera Mode
Photo (*)
Video
Photo and Video
Sending Mode
Photo (*)
Video
Photo and Video
Preview
Security Mode
Disabled (*)
Photo
Video
Photo and Video
Battery Type
Alkaline (*)
Ni-MH
Lithium
Remote Control
Realtime (*)
Every 30 minutes
Every hour
Every 2 hours
Every 3 hours
Every 4 hours
Every 6 hours
Every 12 hours
Every 24 hours
(*)
Enable GPS
(*)
SD card overwrite
Kameraname
SnapShot Cloud 4G PRO
Time Zone
Europe/Berlin
33
Note: Changes made in settings will be executed by the camera after max. 24 hours.
The camera takes photos according to your settings for image size and multi shot.
The camera records videos according to your settings for video size and video length.
The camera first takes a picture(s) and then a video according to your settings for picture size,
multi shot, video size and video length.
Camera is sending photos.
Subscription required for video transmission. See
Subscription required for video transmission. See
In photo, photo and video modes, the quality of the picture is reduced.
This mode is aimed at users with special security requirements - all data transmission (image
and video) is encrypted. Please note that using this mode results in a considerable increase in
energy consumption. We recommend its use for professional users in the security sector and
in combination with an external power source (see chapter 10.3)
To ensure an accurate indication of the battery status, please select whether you have in-
serted alkaline, Ni-MH or lithium batteries in the camera. There are different battery types for
lithium - if in doubt, select „Alkaline".
Settings are applied immediately.
Settings are applied at the latest in the selected time interval. If photos or videos are transmit-
ted from the camera before the time interval expires, the new settings will be applied at this
transmission time.
NOTICE
If you have inadvertently made incorrect settings and the camera is not in real-time
mode, you can correct the settings immediately by first making the desired settings in the
app/web interface and then triggering an image manually via the motion detector, e.g. by
waving your hand in front of the PIR sensor (06).
GPS is represented in radians on the timestamp (e.g. N48°18'44" E010°02'02")
If the SD card is full, the camera overwrites the oldest recordings
If the SD card is full, the camera stops recording until the card is changed or format-
ted.
The camera name assigned can be changed here.
Select the time zone of your region.
Default settings are marked with (*)
My account.
My account.
IMPORTANT High battery consumption!
recommended.
doerr-outdoor.de