Dörr SNAPSHOT CLOUD PRO 4G Manual De Instrucciones página 39

08 | FURTHER FUNCTIONS
08.1 Test Recordings
Option 1: Request a real-time image as described on page 37 in the
„Camera" section.
Option 2: To trigger a test recording manually on the camera, press
the TEST button (13) once when the status display is active and the
camera is ready for use (see chapter 06.8) to obtain media in the de-
fined setting.
While the data is being written to the SD card, the SD card LED
green
flashes . While the test recording is being loaded into the DÖRR
Cloud, the DÖRR Cloud LED
To view your test recording, go to „Media" in the DÖRR APP and tap
on the corresponding camera.
08.2 Deleting/Re-registering a camera
In case you want to sell your camera, please follow these steps:
1. Delete the camera in the APP/web interface:
Cameras › tap on the camera to be deleted ›
Camera
› Tap on › Delete camera
2. Reset camera to factory settings
To do this, press the RESET button (15) on the camera, e.g. with a pen,
for approx. 10 seconds until all LEDs briefly
You or the new owner can now register the camera again in the
DÖRR APP.
39
green
(17f) flashes .
light up green twice
08.3 In the event of theft
If your camera is stolen, do NOT delete it from the APP, as this is
the only way to ensure that the thief cannot register the camera.
Contact our service via the „Report as stolen" function and enter
your contact details there.
Cameras › tap on the stolen camera ›
Camera
› Tap on › Report as stolen
(17d)
09 | MOUNTING / DIRECTING
09.1 Mounting and directing the camera
Pull the supplied mounting strap (26) through the eyelet (23) on the
backside of the camera. Mount the camera to a tree, pole or any other
suitable object. Do not fix the belt finally at this stage.
We recommend placing the camera at a height of 0.75 m to 1.00 m.
The optimal distance to the subject is between 3 and 10 m. Larger
distances are possible as well, but then the reliability of the motion
sensor is no longer given. The camera lens (05) should now point to
where the object is expected to show-up.
To verify your camera is hung up in a correct angle, we recommend
taking a view test recorings (see chapter 08.1). The camera should be
directed in a way that the object will appear in the centre of the pictu-
re. You may have to re-adjust the camera and take another test shot.
. Once the camera position is correct, the mounting belt (26) can be
tightened to hold the camera firmly.
NOTICE
Please also note chapter 10 with our extensive range of accesso-
ries for installation and anti-theft protection.
09.2 Notes for mounting the camera
09.2.1 PIR sensor
The PIR sensor triggers only under specific circumstances within a
certain range. The capturing of objects strongly depends on tem-
perature, vegetal cover, reflecting surfaces etc. Under perfect con-
ditions the recognition range can be up to 20 m. Usually, you may
expect a range of 15 m. It may take a few attempts to find a good
doerr-outdoor.de