Kenmore 911.30168 Guía Para El Uso Y Cuidado página 10

OPERATION
OvenControl, Clock and Timer
Your new control has a series of tones
that wil! sound at different times These
tones may sound while you set the
control for an oven function, or at the
end of the oven function It will also
alert you there may be a problem with
the functions Below are the types of
tones and a brief description of each
TONES WHILE SETTING THE
CONTROL -- When you press a
touch pad you will hear a beep. This
beep will let you know you have
placed enough pressure on tile pad
to activate it (The arrow pads do not
beep)
END OF TIMED CYCLE TONE -- At
the end of a timed cooking function,
you will hear 3 short beeps followed
by 1 beep every 6 seconds This
6-second beep will continue to sound
until the CLEAR/OFF pad is pressed
or you may select the special feature
to cancel this 6-second beep from
sounding at the end of future cycles
TO CANCEL THE 6-SECOND BEEP
Press and hold the BAKE and
BROIL pads, at the same time
for 3 seconds, until the display
shows "SF"
2. Press the KITCHEN TIMER
ON/OFF pad The display will
show "CON BEEP" (continuous
beep)
3. Press the KITCHEN TIMER
ON/OFF pad again The display
will show "BEEP" (beep
canceled).
4. Press the START pad to cancel
the 6 second beep and leave ttqe
speciaf features mode
If you would like to return the
6- second beep, repeat steps above
until the display shows your choice
and press the START pad.
ATTENTION
TONE
-- This tone will
sound if you make an error or an
oversight is made while setting an
oven function
Examples would be:
a. Setting a timed function and not
pressing the START pad
b. Pressing an additional function
pad without first setting a
temperature or time
Any of these can be quickly identified
by watching the display
PREHEAT TONE -- When you set
an oven temperature, the oven
automatically starts to heat When the
temperature inside the oven reaches
the temperature you have set, a tone
will sound to let you know the oven is
ready for baking
If you set an oven function and the
control beeps while the display is
flashing "F" and a number "F-4" or
letter "Fr' there may be a problem
with the control or oven Simply press
the CLEAR/OFF pad and wait about
an hour., Try setting the function
again If the code repeats, write down
the flashing code and call for service
Tell the technician what code was
flashing,,
10