Kenmore 911.30168 Guía Para El Uso Y Cuidado página 19

CARE ANDCLEANING
Removable Parts
Unlock _
The oven bottom may be removed for
cleaning heavy spillovers or to reach
the oven burner,
Be careful not to scratch the oven
finish when removing or replacing the
oven bottom,
TO REMOVE
1, Slide the tab at the center front of
the oven bottom to the left_
2. Lift the oven bottom up and out
CLEANING MATERIALS
* Dishwashing liquid
, Mild abrasive cleaner
o Soap-filled scouring pad
o Commercial oven cleaner
TO CLEAN
Spilfovers such as hot fruit fillings or
foods with acidic content (such as
tomatoes, milk, vinegar or lemon juice)
may cause pitting to the porcelain
surface Clean after each oven use
TO REPLACE
1. Slip the oven bottom into the oven
so the tabs in the rear of the oven
bottom fit into the slots in the
oven back
2. Lower the front of the oven bottom
into place, Slide the tab at the
front of the oven bottom into place
_ AUTION: Disconnect
electrical power to the
oven at the main circuit
breaker or fuse box
before attempting to replace the
oven light bulb. Do not touch a hot
light bulb with wet hands or a wet
cloth° Wait until the bulb has
cooled and use a dry cloth.
Bulb
Socket
Live
Bulb Collar Bail
Cover Wire
TO REMOVE THE COVER
1. Disconnect electrical power to the
oven at the main circuit breaker or
fuse box
2,
Hold your hand under cover and
firmly push back the bail wire,
until it clears and releases the
bulb cover
REPLACE THE LIGHT BULB
Unscrew the light bulb and replace it
with a 40-watt appliance bulb,
TO REPLACE COVER
1. Place the bulb cover into the
groove of the bulb socket
2, Pull the bail wire forward until it
snaps into the indentation on top
of the bulb cover
3. Reconnect the electrical power to
the oven
19