EINHELL GC-CT 18/24 Li P Manual De Instrucciones Original página 17

to be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
•
Lung damage if no suitable protective dust
mask is used.
•
Damage to hearing if no suitable ear protec-
tion is used.
•
Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
•
Injuries and material damage caused by fly-
ing parts.
•
Cut injuries if suitable protective clothing is
not worn.
Danger!
The electric power tool generates an electro-
magnetic fi eld during operation. Under certain
circumstances this fi eld may actively or passively
impede medical implants. To reduce the risk of
serious or fatal injuries, we recommend persons
with medical implants to consult their doctor and
the manufacturer of the medical implant prior to
using the equipment.
4. Technical data
Speed n .............................................8,500 min
0
Cutting circle .......................................... Ø 24 cm
Protection class ................................................III
Sound power level L
WA
Sound pressure level L
Sound power level guaranteed L
K uncertainty ...................................... 2.17 dB (A)
Vibration ..................................................5.8 m/s
K uncertainty .......................................... 2.3 m/s²
Sound pressure level
at the operator's ear ............................... 79 dB(A)
Anl_GC_CT_18_24_Li_P_Solo_SPK13_3411103.indb 17 Anl_GC_CT_18_24_Li_P_Solo_SPK13_3411103.indb 17
-1
...................... 88.1 dB (A)
...................... 79 dB (A)
pA
........ 90 dB (A)
WA
2
- 17 -
GB
K uncertainty ........................................... 3 dB (A)
Caution!
The equipment is supplied without batteries and
without a charger and is allowed to be used only
with the lithium-ion batteries of the Power-X-
Change series!
The lithium-ion batteries of the Power-X-Change
series are allowed to be charged only with the
Power-X charger.
The machine noise might exceed 85 dB (A). The
operator will require noise protection measures
if this is the case. The noise is measured in ac-
cordance with EN ISO 11201:2010 and EN ISO
3744:2010. The value of the vibrations emitted by
the handle was determined in accordance with
EN 28662-1:1992.
Important.
The vibration value changes according to the
area of application of the electric equipment and
may exceed the specifi ed value in exceptional
circumstances.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect condi-
tion.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
5. Before putting into operation
The equipment is supplied without batteries
and without a charger.
5.1 Assembling the handles (Figs. 3-4)
Insert the upper handle (A) and the lower handle
(C) into the middle handle (B) and screw the
handle parts together on both sides using the
screws (8).
5.2 Assembling the additional handle (Fig. 5)
Push the additional handle (2) onto the upper
handle (A) until it clicks into place in the handle.
5.3 Fitting the safety hood (Fig. 6-7)
Push the safety hood (Fig. 1/Item 5) onto the mo-
08.08.2023 15:56:02 08.08.2023 15:56:02