Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Assembly/Disassembly
WARNING!
•
Never use the unit without a dust bag.
•
Make sure the unit is switched off and unplugged from the mains socket before
attaching or detaching any tools.
To assemble:
To install a dust bag, press the dust bag release latch and lift up the front cover.
Extract the dust bag holder from the main unit.
Slide the cardboard part on the top of the dust bag into the dust bag holder.
Place the dust bag in the dust bag compartment and reinsert the dust bag holder.
Close the front cover.
Align the protruding sections on the flexible hose with the notches on the main unit's
flexible hose-connecting inlet, then push to insert it as far as it will go.
1.
Remove the battery compartment cover found on the flexible hose.
2.
Insert the batteries (2 x 1.5 V AAA, not supplied) making sure to match the polarity
(+/-) as indicated in the battery compartment.
3.
Reposition the battery compartment cover.
Insert the metal extension tube into the flexible hose.
To adjust the length of the metal extension tube, grasp hold of the tube's handle and pull
outwards to lengthen the tube or push inwards to shorten it.
Fit one of the tools by inserting it into the metal extension tube or flexible hose.
Floor brush for various types of flooring. Press the pedal to retract the brush (for
carpets or rugs) or extend it (for smooth floors).
Mini brush for furniture.
Round brush for animal hair.
Crevice tool for nooks, recesses and corners.
Use the metal extension tube to get to hard-to-reach areas.
NOTE: The floor brush may scratch or damage certain types of flooring or carpet.
Make sure to test the surface first before using the brush on delicate surfaces.
Alternatively, you can use the mini brush or round brush, should these be suitable.
18
EN
Publicidad
