Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Emptying the dust bag
•
The dust bag is full when the dust bag indicator appears on the LED screen, or the suction
power decreases.
•
Press the dust bag release latch and lift up the front cover.
•
Extract the dust bag holder from the main unit.
•
Slide the dust bag out of the dust bag holder. Empty the dust bag's contents into a bin
and either use it again or insert a new dust bag.
•
Reposition all the parts in reverse order.
NOTE: The front cover will not close if a dust bag hasn't been fitted.
Cleaning the dust bag compartment and HEPA filters
Clean the filters once a month or whenever there is a visible build-up of dirt. Replace the
filters, should they be in any way damaged.
Cleaning the motor filter
•
Remove both the dust bag holder and dust bag.
1.
Pull the motor filter holder upwards out of the dust bag compartment.
2.
Remove the foam filter located behind the filter holder.
3.
To remove the filter inside the filter holder, insert your thumb into the holes in the
grille to separate the holder in two. Remove the foam filter.
•
Wipe the dust bag compartment with a dry cloth.
•
The foam filters and filter holder can be cleaned under running water.
•
Let all the parts dry naturally, then reposition them on the main unit. Be sure to insert the
assembled filter holder into the slots on the back of the dust bag compartment.
Cleaning the air outlet filter
1.
Press both sides of the air outlet latch on the back of the main unit, then remove the
air outlet cover. Extract the foam filter from the air outlet cover.
2.
Pull the lever at the top of the HEPA filter backwards, then extract the filter from the
main unit. Remove the foam filter.
•
Tap all the filter parts over a bin to remove the worst of the dust, then wash them thoroughly
under running water.
•
Let all the parts dry naturally, then reposition them on the main unit. Be sure to place
the HEPA filter and air outlet cover on the bottom first, then push the top part in until it
clicks into place.
22
EN
Publicidad
