Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
To disassemble:
•
Check that the unit is switched off and unplug the plug from the mains socket.
• Press the cable rewind button to stow away the power cable.
• Pull off the flexible hose, mini brush, round brush or crevice tool, or press the release
button on the metal extension tube/floor brush to detach these tools from the main
unit. Store the tools as shown in the Storage section.
Operation
•
Insert the plug into the mains socket.
•
The power cable can be unwound up to the yellow mark. Should the red mark be visible,
this means that you have unwound the cable too far.
Press the On/Off button on the main unit to turn the vacuum cleaner on or off.
To pause the vacuum cleaner whilst it is in use, press the PAUSE button on the remote
control panel. A dash "-" will then flash on the LED screen to indicate that the unit has
been paused. Press the PAUSE button again to resume operation.
NOTE: The indicator turns on whenever any button is pressed on the control panel,
located on the handle of the flexible hose.
Press the + or - button on the main unit's/remote control's panel to increase or decrease
the suction level.
The following symbols are indicated on the vacuum cleaner:
1 MIN
2
3
4 MAX
Curtains, textiles (lowest setting)
Sofas, cushions
Normal carpet
Wooden, stone or other flooring (highest setting)
Dust bag full
19
EN
Publicidad
