Publicidad
Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
CAUTION! To avoid damaging the vacuum cleaner, only
use dry, intact filters!
Cleaning the wheels
Should threads or dirt block one of the wheels, gently insert a screwdriver under the
wheel axle and push up to pry it out. Remove any thread or object jamming the wheel.
Reposition the wheel by firmly pressing it back into its compartment. Make sure it
spins smoothly.
Clearing blockages
Small objects, carpet fibres, etc., can occasionally jam the vacuum cleaner.
•
In the event of a blockage or loss of suction during use, turn off the vacuum cleaner.
•
Detach the flexible hose, metal extension tube and brush/tools to find the blockage and
clear it.
Troubleshooting
Problem
The unit does not
work.
The suction power
is weak, there is
no suction or the
motor vibrates.
Storage
Insert the floor brush into the back of the unit for easy storage.
Possible Cause
• The unit is not
connected to the mains
socket.
• The dust bag is full.
• The tool is blocked.
• The filter is blocked,
dirty or broken.
23
Solution
• Securely insert the plug into the
mains socket. Press the On/Off button
to turn on the vacuum cleaner. If the
unit is still not working, get it checked
by a qualified technician.
• Empty the dust bag.
• Remove the blockage.
• Clean the filter.
• If necessary, replace the filter with
a new one.
EN
Publicidad
